SPONSORS
2024 ICRBE EXPO |
Movable Hood Rings Supplier.
Posted by:
jon tobey
(---.customer.broadstripe.net)
Date: November 26, 2015 02:16PM
Still working on a centerpin rod for a friend. I think if I could just get the movable hood rings from a reel seat as a separate part, my problems would be solved. I'm not finding a supplier for these. Anybody? jontobey@yahoo.com www.gointothelight.wordpress.com Re: Movable Hood Rings Supplier.
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: November 26, 2015 02:28PM
Jon,
Mud Hole model GSR series, different sizes (graphite sliding rings) if that is what you are looking for...... Buzz Re: Movable Hood Rings Supplier.
Posted by:
jon tobey
(---.customer.broadstripe.net)
Date: November 26, 2015 02:35PM
Thank you. That was my first choice. The "graphite" rings that came with the MH Tennessee handle look and feel like cheap plastic. I'm wondering if I can get any metal rings. Otherwise I'd have to get two skeleton kits and canabalize them, which is a bit pricey. Re: Movable Hood Rings Supplier.
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: November 26, 2015 02:40PM
not sure about metal rings. no experience with them. these same "graphite rings" are what you will get from most suppliers. Re: Movable Hood Rings Supplier.
Posted by:
jon tobey
(---.customer.broadstripe.net)
Date: November 26, 2015 02:43PM
No wonder people use tape! ;-(
Maybe a supplier on here will take pity and offer me up some scraps. Re: Movable Hood Rings Supplier.
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: November 26, 2015 02:49PM
Try compression rings............ to tight for natural cork but on burl cork, holds like a rock Re: Movable Hood Rings Supplier.
Posted by:
Craig Johnson1
(---.up.net)
Date: November 26, 2015 04:24PM
Jon,
Janns Netcraft has the aluminum ones in three different sizes. Regards, Craig Re: Movable Hood Rings Supplier.
Posted by:
jon tobey
(---.customer.broadstripe.net)
Date: November 26, 2015 06:07PM
Buzz, thank you. Where do I find compression rings?
Craig, thank you! Re: Movable Hood Rings Supplier.
Posted by:
Bill Sidney
(---.gci.net)
Date: November 26, 2015 10:41PM
or go to the local machine shop an talk to them William Sidney AK Sorry, only registered users may post in this forum.
|