I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Epoxy Application Movie
Posted by: Tom Kirkman (Moderator)
Date: November 24, 2015 03:59PM

Per the request made yesterday, this may help some of you:

[www.youtube.com]


...................

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Steven Tekulsky (---.dyn.optonline.net)
Date: November 24, 2015 05:33PM

A great video....Thanks, Tom!

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Gary Kilmartin (---.richland.edu)
Date: November 24, 2015 05:51PM

Well, wasn't that easy looking. I can see I've been spending way too much time on this task.

Thank you, sir.

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Bruce Tomaselli (---.altnpa.east.verizon.net)
Date: November 24, 2015 06:02PM

Thanks for posting, Tom. It's always nice to have a refresher course.

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Mike Rodman (---.google.com)
Date: November 24, 2015 06:38PM

Nicely done sir!

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Ken Finch (---.ip-167-114-118.net)
Date: November 24, 2015 08:40PM

I have always used a flat brush but can see now that I could go much wider than my 1/4 inch and be able to get the finish on much more quickly. Good tip.

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Terje Bendiksby (---.89-10-248.nextgentel.com)
Date: November 25, 2015 09:45AM

Nice video. I have given the link to some friends here in Norway. Thumbs up.

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Roger Rierson (---.triad.res.rr.com)
Date: November 25, 2015 10:48AM

Thank you Tom. I need to get wider brushes. Great video.

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Donald R Campbell (---.lsanca.fios.verizon.net)
Date: November 25, 2015 12:10PM

Tom,

Thank you very much for the video...a picture is worth a thousand words!!

Don Campbell
don@sensorfishingrods.com

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Steven Paris (---.dsl.louisacomm.net)
Date: November 25, 2015 04:43PM

Nice video Tom. Thanks for sharing.
Steve

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: bill boettcher (---.dyn.optonline.net)
Date: November 25, 2015 06:44PM

Yep
it is as easy as it looks No playing with it just put it on

Bill - willierods.com

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: mike quinn (---.carolina.res.rr.com)
Date: November 25, 2015 07:24PM

Nice helpfull video. Thanks for taking the time to do it.

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: Bob Jumper (---.zoominternet.net)
Date: November 25, 2015 09:15PM

As simple as it may seem in words, pictures tell all! Very helpful, Thanks Tom!

Options: ReplyQuote
Re: Epoxy Application Movie
Posted by: joseph arvay (107.77.89.---)
Date: November 27, 2015 07:35PM

Hey, the epoxy video was nice, but it's my new sandpaper cutter that's got me all giddy. Some nice vids on the channel, hacksaw blade/cutter board is killer for a guy like me who uses a lot of sandpaper strips for most everything. Thanks for posting those, Tom...I've a new and very useful tool hanging in the garage.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster