I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Lumiseal questions
Posted by: Sid Thao (---.wi.res.rr.com)
Date: November 22, 2015 02:54AM

Hello, I've went through about 18 pages of lumiseal posts and I don't remember seeing anything about cleaning up lumiseal on unwanted places. This will be my first time using it over a decal on wood insert on a reelseat and want to be prepared if I accidentally get it on the aluminum components. Will alcohol work for cleaning? And one more question, can I apply it on with foam brush while rotating on power wrapper or will that cause bubbles? Thanks!

Options: ReplyQuote
Re: Lumiseal questions
Posted by: Chuck McIntyre (---.hsd1.co.comcast.net)
Date: November 22, 2015 05:39AM

Why not apply the decal,coat the insert with Lumaseal, and then assemble the seat? Wait for the Lumaseal to fully cure first.at least a couple of days.

Options: ReplyQuote
Re: Lumiseal questions
Posted by: Sid Thao (---.wi.res.rr.com)
Date: November 22, 2015 09:54AM

Unfortunately I already had the grips and reel seat glued to the blank before my buddy decided he wanted a decal on the seat....but yes I would prob do that next time.

Options: ReplyQuote
Re: Lumiseal questions
Posted by: Phil Erickson (---.dsl.pltn13.sbcglobal.net)
Date: November 22, 2015 11:41AM

I do not believe alcohol is a solvent for Lumiseal. Best to mask off areas to keep clean. Also be sure to test the effect of Lumiseal upon a decal if it is not protected by CP or other coating as Lumiseal is pretty hot on some materials.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster