SPONSORS
2024 ICRBE EXPO |
holographic thread bands
Posted by:
Joseph Renfroe
(---.hsd1.pa.comcast.net)
Date: October 08, 2015 12:11AM
I purchased some holographic 1/8 inch band to do butt wraps should I use straight thread epoxy on these or first treat them with CP i have already done my wrap and have them tied off I noticed there is a lot of raised areas would I need a couple of coats of CP or just add more thread epoxy thanks for the help Re: holographic thread bands
Posted by:
Michael Danek
(192.183.51.---)
Date: October 18, 2015 08:26PM
I have never used the bands, use size A ProWrap holo thread and have no problems with or without CP. I expect the bands, being metallic, do not need CP. Relative to "raised areas," I expect that a couple coats of epoxy will handle them. When in doubt, do a test wrap and try it without CP. Sorry, only registered users may post in this forum.
|