I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Looking for 6' three-piece blank for peacock bass
Posted by: Jeremy Wagner (---.dhcp.embarqhsd.net)
Date: August 26, 2015 09:06PM

The title says it all. Didn't Batson used to carry something like this? I have a customer that needs one for throwing woodchoppers.

Any ideas?

Thanks,
Jeremy

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Herb Ladenheim (---.lightspeed.wepbfl.sbcglobal.net)
Date: August 26, 2015 09:54PM

Jeremy,
CTS.
See following link for a custom blank
Herb
Distrib CTS Rod Blanks

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Ron Weber (---.ph.ph.cox.net)
Date: August 26, 2015 10:17PM

Rod geeks just released some 4 pc 6'6" travel blanks,

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Jeremy Wagner (---.dhcp.embarqhsd.net)
Date: August 26, 2015 10:36PM

Herb, I'm looking for something at a decent price. If money was no object, CTS would be my pick.

Ron, those are great blanks but they wouldn't stand up to a peacock bass.

Jeremy



Edited 1 time(s). Last edit at 08/26/2015 10:42PM by Jeremy Wagner.

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: August 26, 2015 11:28PM

IC747-3M I believe was the number, the best choice for throwing the big stuff, the 7 Ft. model would wear you out on the big stuff. Schneider's to the left has some in the hot deals section for 20% off.

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Jeremy Wagner (---.dhcp.embarqhsd.net)
Date: August 26, 2015 11:48PM

Thanks Spencer, that's the blank I was looking for!

Jeremy

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Russell Brunt (---.lightspeed.miamfl.sbcglobal.net)
Date: August 27, 2015 06:31PM

I assume this is for use in south america?

Russ in Hollywood, FL.

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Bill Batson (---.wavecable.com)
Date: August 28, 2015 03:21PM

Rainshadow .......
IC747-3M is the blank you need..They are in stock.. contact a Batson distributor..

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Jeremy Wagner (---.dhcp.embarqhsd.net)
Date: August 28, 2015 03:35PM

Thanks Bill! I just ordered one from Schneider's.

Jeremy

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Jeremy Wagner (---.dhcp.embarqhsd.net)
Date: August 28, 2015 03:36PM

Russell, yes. In Brazil.

Jeremy

Options: ReplyQuote
Re: Looking for 6' three-piece blank for peacock bass
Posted by: Ryan McBride (---.wavecable.com)
Date: August 31, 2015 01:05PM

We have had great success with these: [www.rainshadowrodblanks.com]

Good luck!!

R. McBride

Batson Enterprises
BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster