SPONSORS
2024 ICRBE EXPO |
Rattan rod grip
Posted by:
Eric Viburs
(---.mpls.qwest.net)
Date: April 29, 2015 11:36PM
I was kicking around the idea about doing another rattan rod grip. I have made an attempt in the past and it turned out ok but looking to elevate it this time.
Does anyone have any hints or words of advise? Thanks in advance! Eric Re: Rattan rod grip
Posted by:
eric zamora
(---.lightspeed.frsnca.sbcglobal.net)
Date: April 30, 2015 01:33AM
Have you tried Raymond Adams' The Rod Builder's Library under the Grip and Seat Tutorial section? It was the subject of a recent topic.
[www.rodbuildingtutorials.com] eric fresno, ca. Re: Rattan rod grip
Posted by:
Eric Viburs
(---.mpls.qwest.net)
Date: April 30, 2015 07:32AM
I did see the one but the other is newer. Thanks for pointing it out.
The problem I had on the last one was the starting and stop transition. I think I might attempt to alleviate that by using some wood stock and creating a "shelf" if you will to start on. I used an other cork grip last time as well as a liquid glue and it was difficult at best. Re: Rattan rod grip
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: April 30, 2015 09:43AM
That site is great You can spend hours on it and learn so many ways to one thing Then incorporate your own tricks and combine things Hope it never goes away Bill - willierods.com Re: Rattan rod grip
Posted by:
David Miller
(---.triad.res.rr.com)
Date: May 01, 2015 05:22PM
I am wanting to do a rattan grip as well . I am rebuilding an old Lamiglas fiberglass fly rod and going with a bamboo slide band reel seat.
What thread would be best use to spiral in the groove of the rattan? Would size A nylon work and does it need to be the NCP type? Thanks, Dave Re: Rattan rod grip
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: May 01, 2015 05:50PM
How much color do you want It would be easier to use NCP no CP to use A thread will give a little color D will give more Then again two threads of different colors will make it look even better ??
Play with it I checked it out and am thinking of different things that can be done I have also taken rod bond - mixed it and then taken a paper towel dipped in it and spread it over handles for cord handles - That is only if you don't want it to come off Bill - willierods.com Edited 1 time(s). Last edit at 05/01/2015 05:58PM by bill boettcher. Re: Rattan rod grip
Posted by:
David Miller
(---.triad.res.rr.com)
Date: May 02, 2015 05:01PM
Yeah I am going to have to get a hank of chair cane and have some fun experimenting making some rattan grips. I might try different width cane as well. Sorry, only registered users may post in this forum.
|