SPONSORS
2024 ICRBE EXPO |
Fly Reel Repair
Posted by:
Michael Olkowski
(---.sgamf.com)
Date: April 20, 2015 03:58PM
I know this is a little outside the Rod Builders Forum, but does any body know where to either get replacement parts or have a Fly reel repaired?
Thank you for your time Mike Re: Fly Reel Repair
Posted by:
gary Marquardt
(141.211.233.---)
Date: April 20, 2015 04:02PM
[www.archuletasreelworks.com]
I've used him several times. Re: Fly Reel Repair
Posted by:
Jess Brindisi
(---.washdc.fios.verizon.net)
Date: April 20, 2015 06:35PM
What kind of reel is it and what is broken or is the issue? Re: Fly Reel Repair
Posted by:
Joe Frascella
(---.dyn.optonline.net)
Date: April 21, 2015 05:41AM
secound Archuletas excellant service and resonable Re: Fly Reel Repair
Posted by:
Michael Olkowski
(---.sgamf.com)
Date: April 21, 2015 12:36PM
Gary & Joe - sent them an e-mail
Jess - Cortland ProCast 3/4 weight Thank you for your time Michael Re: Fly Reel Repair
Posted by:
Michael Olkowski
(---.sgamf.com)
Date: April 21, 2015 02:42PM
Jess
Cortland ProCast 3/4 weight The clutch bearing went in it and when I had it apart I dropped the 1. Drag Pins 3 each 2. Drag Switch o-ring Re: Fly Reel Repair
Posted by:
Jess Brindisi
(---.washdc.fios.verizon.net)
Date: April 21, 2015 11:24PM
Hmmm....Have you tried Cortland? Not sure they make the reels they have their name on...but its worth a try.
I did a quick search online and came up empty for any cortland reel parts Re: Fly Reel Repair
Posted by:
Michael Olkowski
(---.sgamf.com)
Date: April 22, 2015 07:42AM
Called them, no parts in stock. You are right the reel is maid in China. I will keep at this for a while. It seems a waste to have to toss it for lack a just a few parts Re: Fly Reel Repair
Posted by:
eric zamora
(---.lightspeed.frsnca.sbcglobal.net)
Date: April 24, 2015 02:47AM
create a new shift lever for your car. use a fly reel seat, slap on that reel for an added point of interest. you will be the rage of the neighborhood. the talk of the town. the bee's knees. the cat's meow. you get the picture.... :)
eric fresno, ca. Re: Fly Reel Repair
Posted by:
Michael Olkowski
(---.sgamf.com)
Date: April 24, 2015 08:31AM
Eric
Thanks for the constructive info, I will consider this. Sorry, only registered users may post in this forum.
|