I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Thank you Roger Wilson
Posted by: Ken Preston (---.opera-mini.net)
Date: April 16, 2015 02:25PM

Thanks Roger the Grizzly MT-1 that you recommended came in. I installed it without difficulty. I also found a compatible backplate so I can order a larger diameter 4 jaw chuck. Just wanted to say "Thanks"

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: Harry Bell (---.dhcp.aldl.mi.charter.com)
Date: April 16, 2015 03:54PM

Roger is a tremendously valuable member here

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: Pat Barnard (---.vctrcmta01.vctatx.tl.dh.suddenlink.net)
Date: April 16, 2015 04:11PM

I agree. Roger is always willing to share and help others, I have benefited from his knowledge as well. He always answers the call for help with requisite effort.

Pat Barnard

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: Randolph Ruwe (---.hsd1.wa.comcast.net)
Date: April 16, 2015 05:20PM

I will ditto that!! x10. Randy

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: April 16, 2015 09:50PM

Ken,
You are quite welcome. Enjoy.

Roger

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: Ken Preston (---.opera-mini.net)
Date: April 16, 2015 10:28PM

Absolutely - a friend / fellow rod builder "enjoyed" the lathe with the new chuck for several hours today .... and I'll be using it most of tomorrow

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: Donald R Campbell (---.lsanca.fios.verizon.net)
Date: April 17, 2015 12:42PM

I have never met Roger; but 'always make sure I read his posts and replies as they demonstrate a vast amount of knowledge, experience and common sense solutions. Keep it up Roger, I look forward to all of your posts and suggestions.

Don Campbell
don@sensorfishingrods.com

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: mike quinn (---.carolina.res.rr.com)
Date: April 17, 2015 04:06PM

Same here as Don C. said. One of the few names I list as author when doing a search.

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: Tom Wewerka (---.bltmmd.fios.verizon.net)
Date: April 17, 2015 08:29PM

Donald R Campbell Wrote:
-------------------------------------------------------
> I have never met Roger; but 'always make sure I
> read his posts and replies as they demonstrate a
> vast amount of knowledge, experience and common
> sense solutions. Keep it up Roger, I look forward
> to all of your posts and suggestions.

X2 Don on that. Roger always provides a positive and helpful solutions to many peoples questions. I hope some day to meet him.

Tom

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: David Boyle (---.lns3.cha.bigpond.net.au)
Date: April 19, 2015 01:39AM

X2.54 to what others have said (fraction due to the fact we use metric Down Under).
I've received helpful advice from Roger on several occasions and he went out of his way to provide it. I really appreciated it.

Thank you Roger!

Dave Boyle

Options: ReplyQuote
Re: Thank you Roger Wilson
Posted by: David Boyle (---.lns3.cha.bigpond.net.au)
Date: April 19, 2015 01:39AM

double post



Edited 1 time(s). Last edit at 04/19/2015 01:40AM by David Boyle.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster