SPONSORS
2024 ICRBE EXPO |
Gluing an aluminum reel seat
Posted by:
Ron Jack
(---.port.east.myfairpoint.net)
Date: April 16, 2015 01:07PM
I am building a spinning rod. I have created a water brake surface on the blank. I am using Rod Bond and an Alps Aluminum real seat. My question is do I need to do anything to the inside of the Alps real seat? Thanks for your help. Ron Jack Bowdoin, Maine Re: Gluing an aluminum reel seat
Posted by:
Tom Kirkman
(Moderator)
Date: April 16, 2015 01:24PM
Clean it with alcohol. Scour/degloss with fine scotchbrite. Adhere.
Do not re-clean the interior after scouring with the scotchbrite. ............. Sorry, only registered users may post in this forum.
|