SPONSORS
2024 ICRBE EXPO |
Hypalon Source for 3/8 ID
Posted by:
Walt Galen
(---.lsanca.fios.verizon.net)
Date: March 03, 2015 10:50PM
Any one have a source for Black Hypalon with an inside diameter of 3/8 or less?
Thanks for racking your brain. Walt Re: Hypalon Source for 3/8 ID
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 04, 2015 09:10AM
Walt,
An easy solution to your problem is to just buy the grip that you wish with a larger hole in it if necessary. Then, pick up some foam arbors and size them to fit on the inside of the grip. Glue the arbors to the blank and then glue the hypalon onto the arbors. Be safe Re: Hypalon Source for 3/8 ID
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 04, 2015 09:11AM
Walt,
An easy solution to your problem is to just buy the grip that you wish with a larger hole in it if necessary. Then, pick up some foam arbors and size them to fit on the inside of the grip. Glue the arbors to the blank and then glue the hypalon onto the arbors. Be safe Re: Hypalon Source for 3/8 ID
Posted by:
Walt Galen
(---.lsanca.fios.verizon.net)
Date: March 04, 2015 09:22AM
Thanks Rodger,
How where do I get the arbors. .....LOL!! Never heard of that technique so I am learning something today. Walt Re: Hypalon Source for 3/8 ID
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: March 04, 2015 03:42PM Re: Hypalon Source for 3/8 ID
Posted by:
Walt Galen
(---.lsanca.fios.verizon.net)
Date: March 04, 2015 04:13PM
OK Thankx Sorry, only registered users may post in this forum.
|