I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Fuji ECSM reel seat question
Posted by: Joe Coughlin (---.mpls.qwest.net)
Date: March 03, 2015 10:08PM

What is the ID of a Fuji ECSM real seat at the rear edge where it mates with the rear grip? What is the OD at that same location? I'm looking for a grip to that will work.

Joe

Options: ReplyQuote
Re: Fuji ECSM reel seat question
Posted by: Bill Falconer (207.203.39.---)
Date: March 04, 2015 08:54AM

Hello Joe -

I'm out of the shop and can't measure for you but Angler's Research / Fuji (sponsor at left) probably has the dimensions on their website.

Also there are some sponsors at left who sell split grips in cork or EVA to fit the ECSM - Swampland, Rod Room, and Mudhole have them for sure. Others probably do as well. In my experience you can call any of the sponsors and tell them what you are trying to do and they'll help you get a grip, tip top, etc. to fit your project perfectly.

You can always make your own carbon fiber grip to fit - they work really well with the ECSM. Or anything else IMHO. Hope this helps. Good luck!

Bill

Options: ReplyQuote
Re: Fuji ECSM reel seat question
Posted by: David Parsons (---.hsd1.pa.comcast.net)
Date: March 05, 2015 08:26PM

Joe id at rear 0.900 od is1.050 to 1.070

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster