SPONSORS
2024 ICRBE EXPO |
Re: 8 wt. fly rod
Posted by:
Jimmy Crain Jr
(---.ph.ph.cox.net)
Date: January 30, 2015 05:47PM
The removable butt kit I used was made by Pac Bay. My problem was the kit was designed to use in larger rods then a 5wt. So the nub that was disigned to fit inside the bank to be glued in place was actually the same size of the blank. So I ended up making a delrin sleeve to glue them together and then hide it under the reel seat. Here is some photos of the end result.
Sorry, only registered users may post in this forum.
|