SPONSORS
2024 ICRBE EXPO |
Top sizing
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: December 08, 2014 10:45AM
Hi Guys
Am I correct that these guide tops rings are measured with the size of the ring ID [www.mudhole.com] Thanks Bill - willierods.com Re: Top sizing
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 08, 2014 01:20PM
Bill,
I called American Tackle and asked them your question. Here is their answer: Hi Roger, Thanks for contacting us! The tip ring size is specified by the OD of the ring. Please let me know if I can help with anything else! Thank you Best Regards, Hunter McKamey Logistics & Customer Service We've moved! Please note our new address. American Tackle Company International, Inc 1641 Smithfield Way, Suite 1209| Oviedo, FL 32765 Phone: 800-516-1750 ext. 1205 | Fax: 407-706-0367 Email: hunter@americantackle.us | www.AmericanTackle.us -------------------------------------------- So, in a nutshell, tip ring sizes are measured from the outside of the ring. This is also the same thing that is used for their guide. That is why, the guides that do not have inserts, have a larger hole, than the same guide or tip with an insert in the same. Be safe Re: Top sizing
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: December 08, 2014 01:30PM
Thanks Roger
Got a guy that wants them on his rods cause he says the ringed ones always come off or crack Bill - willierods.com Re: Top sizing
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: December 08, 2014 02:59PM
Perfect reason.
Be safe Sorry, only registered users may post in this forum.
|