Hello all,
I have exhausted my search of the sponsors. i am looking for two Gunsmoke Frame Gold Ring tip tops. Batson makes it but not in the size i need. i need a 13 (5.2mm) tube and a 10 ring. Link shows the top.
Any help is appreciated,

[alpsforecast.com]

J Scott
Englewood, Fl

Queston....if they don't make it, how do you expect to find it?

Jim,
Since you have indicated that Batson does not make it; have you looked at all of the other guide makers to see if they make it.

Or to ask another question, do you have knowledge that Batson made it at one time, but no longer make it and are hoping to find old stock that someone may have?

Be safe

Thank you for the responses so far.
Someone made it.
I am assuming it was batson since the broken tips look exactly like the attached picture. It may be a discontinured size or a one off for the manufacturer of the rods, Which is a Quantum Blue Runner #bssu5950 5'9'' 40-60#.
I need two tip tops of the size stated above.
I have searched PacBay, AT,Kigan, & Batson.
I was hoping someone may have some old stock.

Regards,

J Scott
Englewood, Fl

Have you talked with Batson? They are very responsive to inquiries.....telephone not email!

Look up CUI products.

Dennis J. Danku
(Sayreville,NJ)

Phil, i Posted on Saturday, i will check with batson tomorrow.
Dennis,
Best i could find there is a 8 ring top with a 7mm tube.
Thanks for the link.

Hi Jim,
Just did a search and this is what I found: [alpsforecast.com]

Let us know if you need any more info.

Thanks Ryan,
that is where i clipped the picture. if you use the drop down menu's and choose the titanium / gold option the next menu down only gives you a choice of 6 for a ring size. and a tube size on the next menu is only 10 i believe. The documents says they have the right sizes. None suppliers i checked carry the top in big enough sizes.

Ryan, i just realized you are Batson. If you can verify that i can get that ring in the size i need i can notify Get Bit to place an order for me. Let me know what you find out.
i can be reached by phone to discuss as well. your email is hidden, but if you send me a contact number i can call you or reply with my cell. i don't want to post it on the forum.

Thank you sir.
J Scott

Jim,

It would be good for Ryan to post his response on the thread so we can all learn and expand out knowledge base.

Good suggestion Chester,
I was only bypassing the forum with my personal contact info
Regards

J Scott
Englewood, Fl

Utmost has them up to a 12......can you shave the finish and make that fit?

I have some of the discontinued Pac Bay LCPNT10 ring 12.0 tubes if you could make it work. $1.00 each. Same colors.

I PROBABLY CAN. THE TIP SEAMS TO BE SOLID FIBERGLASS AND SHOULDN'T HURT IT TO TAKE A LITTLE OFF I THINK.
Mick, send me some info on how to place the order and i will get it right out.
Thanks,
JS

Just sent an email to you Jim. Just need an address and we will get them in the mail today.

Just sent an email to you Jim. Just need an address and we will get them in the mail today.

Thank you Carol @ Utmost.
Your customer service is the absolute best.
I will let you know how they look and fit.

JS

And the shipping from cost to cost is VERY fast i was surprised when I got my orders from them

Bill - willierods.com

Thanks - we love what we get to do every day.