SPONSORS
2024 ICRBE EXPO |
13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Mick Batson
(---.tukw.qwest.net)
Date: October 20, 2014 03:17PM
Utmost Enterprises has added some discontinued green 13' three piece 6-10 pound salmon steelhead blanks for only $45.00 each. Buy two or more and they are $40.00 each. Check out our closeouts page at www.utmostenterprises.com. Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
gary Marquardt
(141.211.151.---)
Date: October 20, 2014 04:21PM
would those be good center pin blanks?? Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: October 20, 2014 07:29PM
Yes Gary, a good center pin choice. Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Carlo Mendoza
(70.50.15.---)
Date: October 21, 2014 01:41PM
What is the weight of these blanks? Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Roger Pascual
(---.statefarm.com)
Date: October 21, 2014 02:15PM
I JUST LOOKED IT UP... ITS 3.0O OZ Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Mark Warnke
(---.oakharbor-wifi-1171.amplex.net)
Date: October 21, 2014 03:13PM
Just Ordered one....Cant wait!
they told me it was an 8 wt. rx7 Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Carlo Mendoza
(70.50.15.---)
Date: October 23, 2014 02:52PM
Interesting ... the model number suggests that it's a Pac Bay Steelhead blank and not a Rainshadow spey blank. Edited 1 time(s). Last edit at 10/23/2014 02:53PM by Carlo Mendoza. Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
bill boettcher
(---.nwrknj.fios.verizon.net)
Date: October 23, 2014 06:33PM
Not for nothing
I checked again and it is listed as a Pac Bay blank Bill - willierods.com Edited 1 time(s). Last edit at 10/23/2014 06:35PM by bill boettcher. Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Mark Warnke
(---.oakharbor-wifi-1171.amplex.net)
Date: October 24, 2014 05:18AM
I am Sorry guys, You are right...it is a pac bay rainforest 2 series blank
RF2SH1561-3 Still a nice looking blank ...reminds me of the St. Croix I just built. I am going too build it ( for myself ) for Salmon fishing with a long handle and a fighting butt built into the end of the blank. Not a detachable We shall see how it performs next year. Here is what I found in my searching: Pacific Bay Rainforest II Series Salmon/Steelhead Rod Blanks GLOSS HUNTER GREEN DARK - Now upgraded to IM7 - The Original RainForest with it’s trademark dark green was designed for the OEM rod manufacturers as a private label item and has been available to all rod builders for several years. Rod builders can also incorporate matching classic reel seats, including our exclusive Channel LockTM design, for a smooth monochromatic look. Our RainForest II features a slightly darker version of previous editions of this highly popular series. Check out our new power blanks with serious actions for serious fishing. Mark Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Spencer Phipps
(---.war.clearwire-wmx.net)
Date: October 24, 2014 06:57PM
If I remember right the last salmon/steelhead Rainforest blanks I was able to get was over a year ago. They were a definite step up from the Tradition series. Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Carlo Mendoza
(70.50.15.---)
Date: October 25, 2014 09:11PM
Mark Warnke Wrote:
------------------------------------------------------- > I am Sorry guys, You are right...it is a pac bay > rainforest 2 series blank > RF2SH1561-3 > Still a nice looking blank ...reminds me of the > St. Croix I just built. > I am going too build it ( for myself ) for Salmon > fishing with a long handle and a fighting butt > built into the end of the blank. Not a detachable > We shall see how it performs next year. > > Here is what I found in my searching: > > Pacific Bay Rainforest II Series Salmon/Steelhead > Rod Blanks > > GLOSS HUNTER GREEN DARK - Now upgraded to IM7 - > The Original RainForest with it’s trademark dark > green was designed for the OEM rod manufacturers > as a private label item and has been available to > all rod builders for several years. Rod builders > can also incorporate matching classic reel seats, > including our exclusive Channel LockTM design, for > a smooth monochromatic look. Our RainForest II > features a slightly darker version of previous > editions of this highly popular series. Check out > our new power blanks with serious actions for > serious fishing. > > > Mark Hi Mark, Could you weigh it when it comes in. The published weight of 3.0 oz sounds too good to be true. Thanks, Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Mark Warnke
(---.oakharbor-wifi-1171.amplex.net)
Date: October 26, 2014 10:52AM
Carlo,
weighed it this morning...tipped the scales at 4 oz. The only thing I wasn't pleased with is the scuff marks in the finish from the pieces rubbing against each other in the plastic bag it was shipped in. Other than that I am looking forward to building this rod. Mark Re: 13' 3 PIECE 6-10 LB SALMON STEELHEAD BLANKS
Posted by:
Carlo Mendoza
(70.50.15.---)
Date: October 29, 2014 10:24AM
Thanks Mark. Sorry, only registered users may post in this forum.
|