I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Rodmaker Question
Posted by: Tony Politi (---.dyn.optonline.net)
Date: October 18, 2014 09:44PM

Tom, are we up for a new issue of RM this month?

Options: ReplyQuote
Re: Rodmaker Question
Posted by: Tom Kirkman (Moderator)
Date: October 19, 2014 07:50AM

Yes. Most will get it towards the end of the month. A few already have it.

...........

Options: ReplyQuote
Re: Rodmaker Question
Posted by: Ed Hickl (---.hsd1.tx.comcast.net)
Date: October 19, 2014 10:30AM

HGS article in Vol 17 #5 says I could find the spreadsheet in the library section. I am having trouble finding it in the library using the link address published in the article. Can someone clarity exactly where I could find the spreadsheet please?

Options: ReplyQuote
Re: Rodmaker Question
Posted by: Tom Kirkman (Moderator)
Date: October 19, 2014 10:57AM

It's being put up this week.

.............

Options: ReplyQuote
Re: Rodmaker Question
Posted by: Tony Politi (---.dyn.optonline.net)
Date: October 19, 2014 08:10PM

Thanks Tom, I thought it was the even months, can't wait.

Options: ReplyQuote
Re: Rodmaker Question
Posted by: Ed Hickl (---.hsd1.tx.comcast.net)
Date: October 20, 2014 10:47AM

Thanks. Will check the library later on.

Options: ReplyQuote
Re: Rodmaker Question
Posted by: Tony Politi (---.dyn.optonline.net)
Date: October 22, 2014 08:26PM

Got it today, thanks again

Options: ReplyQuote
Re: Rodmaker Question
Posted by: Ed Hickl (---.hsd1.tx.comcast.net)
Date: October 25, 2014 09:32AM

Been out of town. Got the spreadsheet today. Thanks.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster