SPONSORS
2024 ICRBE EXPO |
spacing for rollers on rod
Posted by:
Frank McKinney
(---.sub-70-196-3.myvzw.com)
Date: September 27, 2014 05:35PM
Does any one have a guide spacing chart for rollers Re: spacing for rollers on rod
Posted by:
Randolph Ruwe
(---.hsd1.wa.comcast.net)
Date: September 27, 2014 09:48PM
Contact AFTCO Re: spacing for rollers on rod
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: September 27, 2014 11:23PM
Thanks Tom
I was thinking that a guide static spacing would work Kind of like the same thing Line follows the blank Never thought of it before Don't do many roller guide rods Bill - willierods.com Re: spacing for rollers on rod
Posted by:
Eugene Moore
(---.dhcp.stls.mo.charter.com)
Date: September 29, 2014 07:52PM
Frank,
I've not built a roller guide rod but the principles should still apply. What is the distance from reel seat to rod tip ? How many guides are you planning on using ? What is the tip dia of the blank ? Gene Re: spacing for rollers on rod
Posted by:
Frank McKinney
(---.sub-70-196-3.myvzw.com)
Date: September 29, 2014 08:34PM
Thanks guys
I was thinking the static guide spacing would work but was not sure with rollers because I had never built a rod with rollers and wanted to make sure before I did it. Thanks again Frank McKinney Re: spacing for rollers on rod
Posted by:
Tom Kirkman
(Moderator)
Date: October 01, 2014 07:56PM
It is the same principle.
............ Sorry, only registered users may post in this forum.
|