SPONSORS
2024 ICRBE EXPO |
EVA Grips
Posted by:
Lee Bossley
(---.warpspeed1.net)
Date: September 07, 2014 04:02PM
I starting to build a new rod . I'am going to use eva grips if never use them before. i would like any tips on putting them on the rod blank . i'am doing a split handle grip.Do I need to drill the hole out on the grips like on a cork handle?
Thanks for any help, Lee Re: EVA Grips
Posted by:
Tom Kirkman
(Moderator)
Date: September 07, 2014 07:56PM
Check the FAQs page here - it has the skinny on installing them.
............ Re: EVA Grips
Posted by:
Lee Bossley
(---.nstci.net)
Date: September 08, 2014 08:14AM
Thanks Tom I just didn't look for enough. Sorry, only registered users may post in this forum.
|