I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Help Blank Guru's
Posted by: lee smith (---.hsd1.ms.comcast.net)
Date: August 28, 2014 03:27PM

I am lost on this one and only know to ask the guys that have helped me before!

I have a customer that wants a spinning rod made to order that will compare with a Dobyns 7'6" 765SF in action. With that said, he wants 7'6" heavy action with a fast tip. Will be using it for Bass in California, fishing grass/tules, ect...

My problem is, he needs it light weight, he is an older gentleman with shoulder issues and the weight is very important. I was looking at doing a Phenix k2, but not sure the tip will be fast enough. I have built a few spinners from casting blanks without a problem, but at different powers. I also looked at the Batson IMMC76H or MH, again, but am worried about sensitivity.

The biggest concern is this will be an expensive build that will be a one of a kind and want this guy happy to say the least. What ideas do you Guru's have for me?

Thanks,

Lee

Options: ReplyQuote
Re: Help Blank Guru's
Posted by: Todd R. Vivian (---.se.biz.rr.com)
Date: August 28, 2014 03:33PM

Lee,
I'd take a good look at the MB905-MHX or MB904-MHX, both light weight and balance very well built spinning.
[www.mudhole.com]

Regards,

Todd

Regards,
Todd Vivian
Mud Hole Custom Tackle

todd@mudhole.com

Options: ReplyQuote
Re: Help Blank Guru's
Posted by: lee smith (---.hsd1.ms.comcast.net)
Date: August 28, 2014 05:09PM

Todd,

How is the castability of that blank? This runs into my issues with this build. Kinda have to have it all, Strength/Sensitivity/Lightness/Castability. I use a ton of MHX blanks, mostly the HM models, how is this blank compared?

Options: ReplyQuote
Re: Help Blank Guru's
Posted by: Todd R. Vivian (---.se.biz.rr.com)
Date: August 28, 2014 05:50PM

Lee,
what is he going to be throwing with it?

Todd

Regards,
Todd Vivian
Mud Hole Custom Tackle

todd@mudhole.com

Options: ReplyQuote
Re: Help Blank Guru's
Posted by: Eugene Moore (---.dhcp.mrqt.mi.charter.com)
Date: August 28, 2014 06:07PM

Lee,
St Croix 5C74HF-B
1-piece med heavy 7'4" fast castng blank should do the trick.
Light and sensitive

Gene

Options: ReplyQuote
Re: Help Blank Guru's
Posted by: lee smith (---.hsd1.ms.comcast.net)
Date: August 28, 2014 06:23PM

Todd R. Vivian Wrote:
-------------------------------------------------------
> Lee,
> what is he going to be throwing with it?
>
> Todd

Plastics, jigs, frogs, in major slop, but will be casting. he has to set down

Options: ReplyQuote
Re: Help Blank Guru's
Posted by: lee smith (---.hsd1.ms.comcast.net)
Date: August 28, 2014 06:25PM

thanks Gene, I'll look into that blank. I haven't used many St.Croix, but know they have a good reputation.

Options: ReplyQuote
Re: Help Blank Guru's
Posted by: lee smith (---.hsd1.ms.comcast.net)
Date: August 30, 2014 03:56AM

the customer is leaning toward the Immortal Series RainShadow, IMMC76H but he is scared it's going to be a broom stick with NO flex. Anybody tried these yet? I know they are new and I have not used them.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster