SPONSORS
2024 ICRBE EXPO |
Recommendation for Jerkbait Blank
Posted by:
Donald R Campbell
(---.lsanca.fios.verizon.net)
Date: August 14, 2014 08:21PM
I am looking for a recommendation for a LMB Jerkbait Blank. In the past, I have used the ST Croix SCIV 4C68MF on those that I have built; however this blank is no longer available. The rod is for a buddy in my Bass Club and he has tried the St. Croix Jerkbait rod and really liked the rod. A rod blank in the same length range 6'-8" or 6'-9".
I appreciate any recommendations you guys might suggest. Thanks Don Campbell don@sensorfishingrods.com Re: Recommendation for Jerkbait Blank
Posted by:
Jim Gamble
(---.res.bhn.net)
Date: August 14, 2014 10:10PM
Hydra. Made in the US, board sponsor. Majority of my personal rods and exactly what I use for the technique.
[hydrafishing.com] Re: Recommendation for Jerkbait Blank
Posted by:
Don Morse
(---.lightspeed.dybhfl.sbcglobal.net)
Date: August 15, 2014 08:06AM
Don, Check out the Bushido SJ68/8-15.... it should fit the bill very nicely and is super durable.
[www.americantackle.us] ______________________________________ Super Tight Lines......Don Re: Recommendation for Jerkbait Blank
Posted by:
Wes Motsinger
(---.triad.res.rr.com)
Date: August 15, 2014 05:30PM
Second what don said Re: Recommendation for Jerkbait Blank
Posted by:
Bill Tune
(---.mtjltn.broadband.dynamic.tds.net)
Date: August 16, 2014 10:25AM
The 4C68MF Jerkbait St Croix blank is listed on Mudhole site? Re: Recommendation for Jerkbait Blank
Posted by:
Karen Hapka - Bingham Ent.
(---.kc.res.rr.com)
Date: August 16, 2014 12:38PM
The 4C68MF-- St.Croix Jerkbait blank is still available. SCIV graphite. Gloss Cobalt Blue Pearl Finish. Re: Recommendation for Jerkbait Blank
Posted by:
Donald R Campbell
(---.lsanca.fios.verizon.net)
Date: August 16, 2014 02:43PM
Karen,
I now realize that the St Croix 4C68MF is still available. I was looking through my latest Mudhole Catalogue and it was listed, so I made the assumption that they had been dropped. My bad! Don Campbell don@sensorfishingrods.com Sorry, only registered users may post in this forum.
|