I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Layout Tool
Posted by: Mike Walerak (---.sub-174-238-99.myvzw.com)
Date: July 23, 2014 04:36PM

A few years ago I bought a wrap layout tool set. In it was a plastic gage with holes and tic marks at 0.90,180,270 degrees. Somehow I lost it and need to get another one. I'm sure this is some office supply but I have no idea what it is called. Can someone tell me what I had and where I can pick one up?
Thanks
Mike

Options: ReplyQuote
Re: Layout Tool
Posted by: Ellis Mendiola (---.lightspeed.hstntx.sbcglobal.net)
Date: July 23, 2014 05:00PM

Some art supply stores or arts and craft stores carry templates with different sizes of holes and have marks every 90 degrees.

Options: ReplyQuote
Re: Layout Tool
Posted by: Jim Gamble (---.res.bhn.net)
Date: July 23, 2014 05:28PM


Options: ReplyQuote
Re: Layout Tool
Posted by: Mike Walerak (156.98.210.---)
Date: July 24, 2014 08:30AM

Yes Thank You. I just did not know what it was called. It is one of those tools that you don't really think about until you don't have it. I'm guessing one of my kids might have walked off with it.
Thanks Again!
Mike

Options: ReplyQuote
Re: Layout Tool
Posted by: David Parsons (---.hsd1.pa.comcast.net)
Date: July 26, 2014 05:21PM

I got one at staples

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster