SPONSORS
2024 ICRBE EXPO |
Manufacture tags (Guides)
Posted by:
Mark Schulte
(---.tnt2.valparaiso.in.da.uu.net)
Date: October 28, 2001 08:55AM
I was wondering if a person can purchase the small tags that many rod manufactures put on the retail rods displaying FUJI guides, concept , etc. I thought it would be a nice touch of professionalism to tag my rods after building them. I made a nice business card size tag to display care tips on one side and my name , address, phone number and Rod information on the other side. Thanks, Mark Schulte Re: Manufacture tags (Guides)
Posted by:
Tom Kirkman
(---.dialinx.net)
Date: October 28, 2001 09:52AM
You might consider printing your tags on Avery labels, maybe the large 8164's, and then cutting them out and sticking them on round tags. You can buy tags like this at most office supply or paper supply stores. ........................... Re: Manufacture tags (Guides)
Posted by:
Karen Hapka
(---.proxy.aol.com)
Date: October 28, 2001 12:23PM
Unfortunately, the tags used on the factory rods are exclusive to those rods only. I have had several customer inquiries into purchasing Fuji hang tags and the reponse from Fuji is sorry they are for factory rods only. Go with Tom Kirkmans's advice and make your own. Karen Hapka Bingham Enterprises Re: Manufacture tags (Guides)
Posted by:
Russell
(---.proxy.aol.com)
Date: October 28, 2001 05:53PM
Are you talking about getting and using the factory tags? I would think this would be a no-no on all counts. But you could certainly make your own saying that the guides are "genuine whatever". But you still wouldn't want to copy their logo or anything as those things are probably copywrited. Sorry, only registered users may post in this forum.
|