SPONSORS
2024 ICRBE EXPO |
Help needed selecting colors
Posted by:
Casey Abell
(205.145.107.---)
Date: April 11, 2012 02:41PM
Im horrible at trying to select colors. So I thought I would get some suggestions here.
Will be painting a 9' rod. Handle will be natural carbon fiber and reel seat will also be black. I currently have the following thread choices. White Black Copper Versablend Tigerwrap. Any thoughts on blank color and thread combinations ??? thanks Re: Help needed selecting colors
Posted by:
Andrew Lang
(208.60.60.---)
Date: April 11, 2012 03:17PM
Here is what my mind came up with. If you can find paint that is close to the copper, paint the blank copper, then wrap the guides in black with a copper accent (2-3 wraps). Then do the butt-wrap in black/copper. I say this becaue I just did a St. Croix SCV spinning that is the blue-green color and I had a blue-green thread that was almost identical color. I did what I just described and I think it looks fantastic. The black wraps really pop on a boldy colored blank. Good Luck. Re: Help needed selecting colors
Posted by:
Billy Vivona
(---.nycmny.fios.verizon.net)
Date: April 11, 2012 03:21PM
Choosing colors made easy: [northeastrodbuilders.com] Re: Help needed selecting colors
Posted by:
Casey Abell
(205.145.107.---)
Date: April 11, 2012 03:23PM
Andrew Lang Wrote:
------------------------------------------------------- > Here is what my mind came up with. If you can > find paint that is close to the copper, paint the > blank copper, then wrap the guides in black with a > copper accent (2-3 wraps). Then do the butt-wrap > in black/copper. I say this becaue I just did a > St. Croix SCV spinning that is the blue-green > color and I had a blue-green thread that was > almost identical color. I did what I just > described and I think it looks fantastic. The > black wraps really pop on a boldy colored blank. > Good Luck. I do like that Idea... In fact I have some paint setting around from years back where I spot painted a camaro fender. It was a very sharp copper looking color. I would be curious if anyone has suggestions for a color using the tiger thread sold by Mudhole. I was really hoping to use it somewhere. Re: Help needed selecting colors
Posted by:
John Yard
(---.dyn.optonline.net)
Date: April 12, 2012 10:30AM Re: Help needed selecting colors
Posted by:
Casey Abell
(205.145.107.---)
Date: April 12, 2012 10:53AM
John Yard Wrote:
------------------------------------------------------- > Check out this link to help with picking colors. > > [colorschemedesigner.com]# that is a cool site... its gonna take me a while to figure out exatly what is going on but I think it may be a good help. the only bad thing about the online color charts like that is you cannot duplicate a true metallic like gold etc... But it should get it in the ballpark. thanks Sorry, only registered users may post in this forum.
|