SPONSORS
2024 ICRBE EXPO |
O rings for Tennessee handles
Posted by:
Jerry Haight
(---.sub-75-219-51.myvzw.com)
Date: February 03, 2012 06:37PM
Looking to find out where I can find these colored o rings for tennessee handles on ice rods. Re: O rings for Tennessee handles
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: February 04, 2012 01:31AM
Check the suppliers on the left Bill - willierods.com Re: O rings for Tennessee handles
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: February 04, 2012 09:07AM
Jerry,
What were you planning to use the O rings for? Were they going to be part of the grip, or were the O rings going to be used for something else. I have built large numbers of ice rods and have never used any O rings in the build of the rods. I was just curious as to the purpose of O rings on ice rods. If you are talking about using something to hold reels to ice rods, I just use electrical tape to tape the reels to the rods. There are rods with Tennessee handles that use various sorts of slip rings - either metal or graphite that are used to hold the reels in place. As Bill stated, the suppliers on the left have the slip rings available for Tennessee handles, if this is what you are asking about. Good luck Roger Re: O rings for Tennessee handles
Posted by:
Jerry Haight
(208.11.74.---)
Date: February 04, 2012 03:30PM
I'm sorry I must not be clear enough. i have seen some I ice rods with colored o rings on them to secure the reel rather than to tape them. It just gave the rod a different look than black electricai tape. I am not talking about the slip rings. I found some rubber o rings today at our mantainence shop at work. I filed down a couple grooves in the bottom of my reel and rolled the o rings onto them. Seems to hold it pretty good. Just looking for something different than everybody elses. Sorry, only registered users may post in this forum.
|