SPONSORS
2024 ICRBE EXPO |
Rod epoxy with rod finish
Posted by:
Tony
(---.dialsprint.net)
Date: October 12, 2001 10:45PM
Hello can you use rod epoxy and rod finish on wraps at the same time ? And what is the end result if you do. thanks Re: Rod epoxy with rod finish
Posted by:
Tom Kirkman
(---.dialinx.net)
Date: October 13, 2001 09:58AM
The epoxy intended for use as an adhesive has been formulated with certain properties in mind. That designed for use as a wrap coating has been formulated with different properties in mind. If you use an epoxy adhesive as a wrap coating, it will work insofar as it will coat the threads, but there will be some serious drawbacks. Rarely are such products very flexible, clear or good at releasing bubbles. You are much better off using the intended product for its intended purpose. ............................ Re: Rod epoxy with rod finish
Posted by:
Steve Bohrer
(---.ipt.aol.com)
Date: October 14, 2001 03:55PM
A mess. You can use rod finish over the cured epoxy if you want to finish the entire rod. Re: Rod epoxy with rod finish
Posted by:
William
(---.proxy.aol.com)
Date: October 14, 2001 08:25PM
You would never put any sort of epoxy on the rod blank. For that you would want a much thinner coating like a polyurethane or a varnish. Sorry, only registered users may post in this forum.
|