I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

redfish two peice blank
Posted by: John Etheridge (---.sub-75-201-152.myvzw.com)
Date: October 18, 2010 10:24PM

I need (want) a two peice rod for inshore trout/redfish/flounder. This will be my third rod. Wife says to make it inexpensive, last blank was St Croix. Will be using 3000 series reel, fishing from kayak. 7' to 8' range. 1/4 to 1 ounce or there abouts. Thanks, John

Options: ReplyQuote
Re: redfish two peice blank
Posted by: Jim Gamble (97.106.17.---)
Date: October 18, 2010 10:43PM

I would look at the Rainshadow Popping Blanks ... [www.batsonenterprises.com]

The IP904F would be just the ticket for kayak use. Long enough to reach around the hull when they decide to test your talent.

Options: ReplyQuote
Re: redfish two peice blank
Posted by: Bob Riggins (---.200-68.tampabay.res.rr.com)
Date: October 18, 2010 11:02PM

I fish for redfish from a kayak most of the time. My favorite size rod is a 6 - 12# line weight rod rated for 1/8 to 1/2 oz lures (Medium light) - 7 foot rod. My favorite blank is the GLoomis PR842-2 GL3, however, it is expensive and hard to find. My next choice in your price range would be the Rainshadow IP843 F, 2 piece RX7 popping blank.

I have just built on a Mudhole SJ843-2 MHX travel blank 8 - 15# rated for 3/8 to 5/8 oz lures for a friend. It turned out very nice and is a good value at $54. If I were building it for myself, I would probably use the lighter SJ842-2 MHX.



Edited 1 time(s). Last edit at 10/19/2010 11:51AM by Bob Riggins.

Options: ReplyQuote
Re: redfish two peice blank
Posted by: Spencer Phipps (---.war.clearwire-wmx.net)
Date: October 19, 2010 12:05PM

Rogue has a very nice X fast popping rod blank, the P705-2 if I remember right.

Options: ReplyQuote
Re: redfish two peice blank
Posted by: Todd R. Vivian (221.2.136.---)
Date: October 20, 2010 05:44AM

John,
I have fished the SJ842-MHX for quite some time and works very well for most Trout/Redfish applications.
One thing that we have just approved are the MHX popping blanks in 2pc. these should be available by the first of the year.

Regards,

Todd

Regards,
Todd Vivian
Mud Hole Custom Tackle

todd@mudhole.com

Options: ReplyQuote
Re: redfish two peice blank
Posted by: Bill Batson (---.olympus.net)
Date: October 20, 2010 02:05PM

The Rainshadow 2 pc Popping blanks have been on the market for well over 2 1/2 years now and have done very well for many different applications. Take a look at them, i am sure you will find something that works for you.

[www.batsonenterprises.com]

the 2pc blanks are at the bottom of the page
The Vision Continues>>High Quality Products at reasonable prices>>backed up with the #1 customer service in the industry.
If you have any questions please feel free to contact our experienced staff of professionals>>

The Batson TEAM
Home of the ORIGINAL>> Rainshadow/Forecast/ALPS product lines>>
877-875-2381
www.batsonenterprises.com
batson@batsonenterprises.com



Edited 1 time(s). Last edit at 10/20/2010 06:29PM by Tom Kirkman.

Options: ReplyQuote
Re: redfish two peice blank
Posted by: bill boettcher (---.dyn.optonline.net)
Date: October 20, 2010 10:52PM

Hay Guy

You can not get any better then that !!!

Bill - willierods.com

Options: ReplyQuote
Re: redfish two peice blank
Posted by: Dave Wylie (---.ec.res.rr.com)
Date: October 22, 2010 03:45PM

My go to Red Drum rod is a 7' P8400 GLX with a Daiwa Certate 3000 reel. This rod/reel has been adequate for fish up to about 12lbs and I use Fireline braid. Unfortunately this blank is no longer available from Shamino BUT I would recommend a similar popping rod in the 7’ to 7.6’ range. I don’t believe that you would be disappointed with this setup.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster