I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

photos from the Expo, who posted them
Posted by: Buzz Butters (---.ripon.k12.wi.us)
Date: March 25, 2010 01:02PM

A short while ago someone posted some really nice photos here from the forum. I was using the one of the custom rods in the NERBS rod rack when my computer crashed and I am redoing every thing on my PC over, Where is that post? I want to use the same photo for my background again.
Thanks
Buzz

Options: ReplyQuote
Re: photos from the Expo, who posted them
Posted by: Bill Koski (---.hsd1.ca.comcast.net)
Date: March 25, 2010 01:10PM

Maybe from Raymond Adams?

Options: ReplyQuote
Re: photos from the Expo, who posted them
Posted by: Buzz Butters (---.ripon.k12.wi.us)
Date: March 25, 2010 01:24PM

I searched Ray and looked at all of his posts and I don't think it was him.

Options: ReplyQuote
Re: photos from the Expo, who posted them
Posted by: Tom Kirkman (Moderator)
Date: March 25, 2010 02:05PM

I posted this one which contains some of those rods. Not sure it's the one you're after, however.

[www.rodbuilding.org]


.............

Options: ReplyQuote
Re: photos from the Expo, who posted them
Posted by: Silvia Davis (---.hsd1.tx.comcast.net)
Date: March 25, 2010 02:34PM

Buzz,

I bet you are thinking of Patrick Lewis. He and I were in touch after those photos were posted. He did a fantastic job of capturing the essence of the expo.

Silvia Davis

Options: ReplyQuote
Re: photos from the Expo, who posted them
Posted by: John Repaci (---.ri.ri.cox.net)
Date: March 25, 2010 02:54PM

Raymond Adams sent me a series of photos by email(which I've since deleted by error).
You might ask Raymond

"It ain't what you don't know that gets you into trouble.It's what you know for sure that just ain't so." Mark Twain
John in Wethersfield, CT

Options: ReplyQuote
Re: photos from the Expo, who posted them
Posted by: Buzz Butters (---.ripon.k12.wi.us)
Date: March 25, 2010 03:44PM

Silvia, it was Patrick, thank you very much!
Buzz

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster