SPONSORS
2024 ICRBE EXPO |
trying to search on 27X
Posted by:
justin keithley
(---.dhcp.aldl.mi.charter.com)
Date: March 16, 2009 01:47PM
No results? that can't be right - i can see a thread on the main page right now that has "27X" right in the title. I've tried any words, all words, exact phrase made sure to specify all date ranges and various combinations of "27X"... nada. I remember reading the original post but wanted to refresh my memory - if anyone has it bookmarked - please link me. Regards, -Justin Re: trying to search on 27X
Posted by:
Obed Patty
(164.144.248.---)
Date: March 16, 2009 02:09PM
Justin,
I had the same exact problem not too long ago. Try New Guide Concept and other phrase derivatives. For some reason that search does not work. I tried 27, 27X, 27 X, 27x, and nothing. Stranger than friction. Good luck Re: trying to search on 27X
Posted by:
Tom Kirkman
(Moderator)
Date: March 16, 2009 02:39PM
The article is in RodMaker Magazine. Only bits and pieces exist on the forum and elsewhere on the internet.
.............. Re: trying to search on 27X
Posted by:
Wade White
(---.flex.iowatelecom.net)
Date: March 16, 2009 02:52PM
Tom,
Which issue is that in and how do can we get a copy. I'm in the same boat (pun intended) and a litte confused on the 27x method. I was measuring my spool diameter and then got to thinking. Do I measure the inner diameter (no line) or outer diameter (full of line). I also had heard from a reputable source that a rule of thumb was 1/2 the spool diameter for the first guide. Again the same question applies, inner or outer diameter? Forgive us newbies for all the questions, but we just don't know. BTW, Tom, I just got your book in the mail today and was thumbing through it at lunch. I can't wait to sit down and read it tonight. Re: trying to search on 27X
Posted by:
Tom Kirkman
(Moderator)
Date: March 16, 2009 02:57PM
It's in volume 10 #4.
The outer diameter of the spool is what the line must contend with as it flows out and over the spool lip. Thus, that is the important part when taking the measurements. .............. Re: trying to search on 27X
Posted by:
Wade White
(---.flex.iowatelecom.net)
Date: March 16, 2009 03:02PM
Thank you Tom. I thought that was the case, but in my mind it's better to ask first than suffer the consequeces. Re: trying to search on 27X
Posted by:
Mo Yang
(---.static.rvsd.ca.charter.com)
Date: March 16, 2009 04:42PM
I let my subscription lapse, regretted it and now am back on. I puchased the magazine on the 27X that Tom mentioned. Well worth it and recommend that issue.
Mo Re: trying to search on 27X
Posted by:
Eric Nelson
(---.dhcp.ahvl.nc.charter.com)
Date: March 16, 2009 05:45PM
Type in "choker guide" in the search. Lots to read concerning 27X. Sorry, only registered users may post in this forum.
|