SPONSORS
2024 ICRBE EXPO |
Fuji MNSG, LNSG, NSG?
Posted by:
Will Dea
(---.hsd1.ca.comcast.net)
Date: October 04, 2008 01:23AM
Between the Fuji MNSG, LNSG, and NSG which have the lowest ring height using a size 16 for example? Meaning, which sits closest to the blank?
Is there an online guide of the Fuji ring heights available? I haven't been able to make heads or tails of the Fuji website. Thanks! Re: Fuji MNSG, LNSG, NSG?
Posted by:
Anthony Lee
(---.186.12.10.cache.maxonline.com.sg)
Date: October 04, 2008 02:17AM
Fuji guide height in mm:
MNSG LNSG NSG 16 22 22 22.5 12 17.3 17.4 18.0 10 14.6 14.6 15.5 Re: Fuji MNSG, LNSG, NSG?
Posted by:
Will Dea
(---.hsd1.ca.comcast.net)
Date: October 04, 2008 12:39PM
Thanks Anthony!
So what I gather from the measurements, the MNSG and LNSG are the same height. But what's the difference between the MNSG and LNSG guides? Thanks again! Re: Fuji MNSG, LNSG, NSG?
Posted by:
Anthony Lee
(---.186.12.10.cache.maxonline.com.sg)
Date: October 04, 2008 11:19PM
Hi Will,
The major difference is the foot print. MNSG has a broader base. From toe to toe, the width for size 16 is 34.7mm and its footprint is 10.0mm as opposed to LNSG's width of 32.5mm and foot print 9.0mm. The weight is not given in Fuji's catalog but I am very sure LNSG is slightly lighter than MNSG. Therefore, my preference is for MNSG to be used for salt water and LNSG for fresh water. You should be able to get Fuji's specification at matagi.com.jp. Cheers, Anthony Lee Re: Fuji MNSG, LNSG, NSG?
Posted by:
Billy Vivona
(---.nycmny.east.verizon.net)
Date: October 05, 2008 09:32AM
Anthony, good info. I weighed the same frames, different ring materials, here's what I got:
BLNAG 16 = .06oz TLNSG 16 = .04 BMNAG 16 = .08 BNLG 16 = .085 TNSG 16 = .06 Re: Fuji MNSG, LNSG, NSG?
Posted by:
Will Dea
(---.hsd1.ca.comcast.net)
Date: October 06, 2008 12:08AM
Thanks Anthony and Billy!
Sure wish the MNSG came in titanium tho! Re: Fuji MNSG, LNSG, NSG?
Posted by:
Anthony Lee
(---.186.12.10.cache.maxonline.com.sg)
Date: October 06, 2008 01:40AM
Will,
ICMNSG is a good alternative and I use them for most of my in-shore casting and saltwater rods. I have used them for the last 4-5 years and they can stand up to the elements. Anthony Lee Sorry, only registered users may post in this forum.
|