SPONSORS
2024 ICRBE EXPO |
o-rings for clemmens wheels
Posted by:
jnail
(---.unitelc.com)
Date: September 15, 2001 05:23PM
I puchased some rollers from clemmens a few years ago to constuct my own wrapper. they us o-rings for tires. the o-rings are starting to wear out, and need replacing. I haven't been able to find anything at the hardware store that fits. I don't know if these are the same whels used on the factory lathe set up. Is it possible to get new o-rings? Re: o-rings for clemens wheels
Posted by:
Jim
(---.icehouse.net)
Date: September 15, 2001 10:05PM
I've had a Clemens lathe or years, made o-rings from round o-ring material using superglue. Finally found ready made o-ring, 2" o.d. at PaynPak. Lowes or Home Depot should have them also. Re: o-rings for clemens wheels
Posted by:
Jim Kastorff
(---.proxy.aol.com)
Date: September 15, 2001 10:27PM
Call Clemmens, they sell them Re: o-rings for clemens wheels
Posted by:
Bruce Young
(---.proxy.aol.com)
Date: September 16, 2001 12:00PM
If they don't have them you will find them in any store that specializes in bearing products. Bruce Young Landing Gear Sorry, only registered users may post in this forum.
|