I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Back Issue Alert
Posted by: Tom Kirkman (---.dialinx.net)
Date: July 22, 2001 11:32AM

RodMaker Magazine Back Issues

For all intents and purposes, all of Volume 1 is now sold out. There are a handful of issues #3 and #5, but only a handful of each.

All issues of Volume 2 are nearly sold out. Currently there are less than 100 copies of each remaining and that represents less than a one month supply in most instances. If you want any of these, now is the time to get them.

Volume 3 and Volume 4 are still in good supply for the time being and should be around at least until the end of this year. (The only exception being Volume 3 #3 which is down to 50 copies.)

You can order back issues by clicking on our link on the left side of this page and going to the "back issues" page on the site. The online ordering system is secure. All back issue orders are mailed by 1st class Priority Mail.

I also want to thank all of you who have offered your suggestions on reprints, PDF's, photocopies, etc. I won't go into the particulars but will say that none of these will be pursued. Thus when the back issues are sold out, they are gone forever.

.........................

Options: ReplyQuote
Re: Back Issue Alert
Posted by: Mick (---.proxy.aol.com)
Date: July 22, 2001 06:37PM

I ordered and received all the available back issues a couple weeks back. I cannot imagine a better source for a complete rod building library. The amount of valuable information is almost too much to digest in a couple weeks of nightly reading. I thought it was a lot of money but realize now that it is a bargain.

My only suggestion is for you to provide and sell nice binders to keep them in. I know I can buy these at the home office store but I would really like to have them with the Rodmaker logo on the binder spine.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster