Oh no- flocking dissapointment
|
1,260 |
10 |
Phil Richmond |
07/11/2005 04:23PM
Last Post by Anonymous User
|
Wanted: Dan Craft 803-5III #4 section or whole blank (dead or alive)
|
854 |
4 |
Scott Kinney |
07/11/2005 03:23PM
Last Post by Scott Kinney
|
ferrule cement or 2 part epoxy to attach rod tip
|
2,498 |
7 |
Al Johnson |
07/11/2005 03:00PM
Last Post by Al Johnson
|
Ugly Stick blank
|
1,524 |
5 |
Marc Wisniewski |
07/11/2005 02:37PM
Last Post by Jay Lancaster
|
Ya gotta see this
|
1,626 |
19 |
bill boettcher |
07/11/2005 02:01PM
Last Post by Steve Kolb
|
glitter in finish
|
1,230 |
11 |
Steve Buchanan |
07/11/2005 01:54PM
Last Post by Sharon Johnson
|
AMT Matrix fly rod and guides recommendation
|
1,254 |
3 |
Warren Witkowski |
07/11/2005 01:13PM
Last Post by Spencer Phipps
|
Trolling rod handles
|
1,119 |
6 |
Joe Barthelt |
07/11/2005 12:59PM
Last Post by Phil Richmond
|
PDC Gold/Black
|
5,632 |
0 |
Vernon Wynn |
07/11/2005 12:40PM
Last Post by Vernon Wynn
|
Grip and feather inlay on 6 weight
|
4,525 |
0 |
Gerry Rhoades |
07/11/2005 11:52AM
Last Post by Gerry Rhoades
|
Cracking epoxy and water under the finish-factory rods-why less?
|
2,163 |
13 |
Duane Richards |
07/11/2005 11:28AM
Last Post by bill boettcher
|
Casting Resins-Inserts
|
1,436 |
6 |
Michael Joyce |
07/11/2005 11:11AM
Last Post by bill boettcher
|
I need to match a G Loomis stripping guide
|
1,526 |
5 |
Dick Conway |
07/11/2005 10:40AM
Last Post by Robert crabtree
|
Casting Tests
|
1,201 |
4 |
Rich Levy |
07/11/2005 10:28AM
Last Post by Billy Vivona
|
Doc Ski Rod Building Video
|
1,732 |
2 |
Raymond Adams |
07/11/2005 02:36AM
Last Post by Anonymous User
|
Printing out decals on inkejet printer, Will they last? or fade on a rod?
|
1,130 |
6 |
Al Johnson |
07/10/2005 08:10PM
Last Post by Mike Barkley
|
More
|
3,436 |
0 |
David Spence |
07/10/2005 06:58PM
Last Post by David Spence
|
graphite rings in handle
|
955 |
6 |
Steve Buchanan |
07/10/2005 06:27PM
Last Post by Stan Gregory
|
Cork vs Wood
|
960 |
6 |
Dave DeJong |
07/10/2005 04:56PM
Last Post by Randy Parpart (Putter)
|
perma gloss or spar varnish
|
1,423 |
6 |
joe hamel |
07/10/2005 04:19PM
Last Post by joe hamel
|
wood arbors for spinning reel seats
|
1,046 |
4 |
Matthew Woods |
07/10/2005 02:01PM
Last Post by Anonymous User
|
Mayfly weave
|
4,143 |
0 |
Gerry Rhoades |
07/10/2005 01:30PM
Last Post by Gerry Rhoades
|
opinions on Dan Craft Blanks
|
2,016 |
9 |
Dave Albright |
07/10/2005 12:22PM
Last Post by Marc Forrest
|
Question: Chunks taken off factory paint
|
801 |
4 |
Phil Richmond |
07/10/2005 11:31AM
Last Post by bill boettcher
|
Here it comes!
|
1,130 |
6 |
steve parks |
07/10/2005 11:19AM
Last Post by bill boettcher
|
Guide placement for DanCraft 8'6" FT 3 wt
|
879 |
4 |
Andrew Toynbee |
07/09/2005 11:06PM
Last Post by Jeff Shafer
|
Polyester over polyclay
|
2,814 |
0 |
David Spence |
07/09/2005 10:46PM
Last Post by David Spence
|
Polyester Cast over polyclay
|
2,532 |
0 |
David Spence |
07/09/2005 10:45PM
Last Post by David Spence
|
Bumper guide rod
|
1,176 |
6 |
Gerald McCasland |
07/09/2005 10:43PM
Last Post by Andrew Dear
|
Painting Blanks
|
1,492 |
8 |
Scott Youschak |
07/09/2005 09:27PM
Last Post by Pete Kornegay
|
Once more
|
2,578 |
0 |
David Spence |
07/09/2005 09:09PM
Last Post by David Spence
|
Polyester cast over polyclay
|
2,670 |
0 |
David Spence |
07/09/2005 09:08PM
Last Post by David Spence
|
Polyester Casting over Polyclay
|
3,185 |
0 |
David Spence |
07/09/2005 09:07PM
Last Post by David Spence
|
Winston LT blank question
|
870 |
5 |
Darrin Dembowski |
07/09/2005 09:05PM
Last Post by Darrin Dembowski
|
Maintaining alignments when weaving
|
1,223 |
6 |
Stan Kulgoski |
07/09/2005 08:46PM
Last Post by Jim Upton
|
amtak elite
|
814 |
2 |
jon erbacher |
07/09/2005 08:45PM
Last Post by Spencer Phipps
|
How many guides?
|
831 |
2 |
Arturo Sola |
07/09/2005 07:50PM
Last Post by Raymond Adams
|
Spigot ferrule repair
|
1,038 |
2 |
Rich Margiotta |
07/09/2005 03:50PM
Last Post by Anonymous User
|
feather inlays
|
1,754 |
2 |
Rick Heintz |
07/09/2005 03:48PM
Last Post by Anonymous User
|
Selecting Guides
|
1,047 |
4 |
Ralph Tomaccio |
07/09/2005 02:20PM
Last Post by Dan Sparks
|
hypolon &eva
|
1,403 |
10 |
david williams |
07/09/2005 01:14PM
Last Post by Anonymous User
|
AllStar 1508-2
|
1,043 |
3 |
Mike Riggs |
07/09/2005 12:01PM
Last Post by Doug Cox
|
Empty 1oz spools.
|
1,042 |
6 |
James(Doc) Labanowski |
07/09/2005 11:25AM
Last Post by James(Doc) Labanowski
|
"California Style"
|
1,351 |
7 |
Ron Alley |
07/09/2005 11:21AM
Last Post by Jay Lancaster
|
Foot prep on Gold coloured guides
|
1,067 |
9 |
Chris Richer |
07/09/2005 09:29AM
Last Post by Anonymous User
|
Buy / Sell pictures
|
983 |
1 |
bill boettcher |
07/09/2005 08:23AM
Last Post by bill boettcher
|
4 piece 7 wt fly blank for Bones please Around $150
|
1,103 |
5 |
mike oliver |
07/09/2005 07:07AM
Last Post by bill boettcher
|
2nd Attempt 3oz 4 piece Spinn blank for Surf
|
996 |
5 |
mike oliver |
07/09/2005 06:09AM
Last Post by Dan L Craft
|
Chuck for cork lathe
|
910 |
3 |
Joe Barthelt |
07/09/2005 12:42AM
Last Post by John Anderson
|
Gatti blanks
|
1,841 |
9 |
Jim Benenson |
07/09/2005 12:09AM
Last Post by Gary Mattila
|