I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Subject Views Posts  Started By  Last Post 
Just 3 more days.................. 1,338  Todd  08/28/2001 08:30PM 
Last Post by Todd
Thread size 1,196  syu  08/28/2001 10:37PM 
Last Post by Jim Kastorff
Seeker Blanks 1,386  John  08/31/2001 05:31PM 
Last Post by Petro Chem
Recommendation for Crankbait Rod 1,293  elrod  08/28/2001 12:25PM 
Last Post by Bob McKamey
Fly Rod Blank Suggestions Needed 1,273  Jeff Stickle  09/01/2001 10:26AM 
Last Post by Dick Thurston
16" foregrips 1,455  Tony  08/28/2001 08:41AM 
Last Post by Petro Chem
Wood threads on older seat 1,273  Rick M.  08/28/2001 12:01AM 
Last Post by Kerry
looking for a rod builder 1,383  jnail  09/03/2001 09:22PM 
Last Post by STEVE D.
JET Mini Lathe 1,425  Andy Dear  08/27/2001 02:03PM 
Last Post by Andy Dear
Gudebrod Electra Metallic Braid 1,942  DaveB  08/28/2001 06:09AM 
Last Post by Jeff Stickle
Solid Fiberglass blanks. . . 6,948  15  Chef Jim  08/30/2001 05:34PM 
Last Post by Mike Bolt
wood inserts 1,766  Don ray  08/29/2001 03:15PM 
Last Post by Clyde Dent
combination fly/spin 1,503  Jay  09/03/2001 11:47AM 
Last Post by Dick Thurston
How to choose action for spinning rod 2,140  Bob Petti  09/03/2001 12:05PM 
Last Post by Dick Thurston
Lamiglas LHS Fly Rod Blanks 1,460  Bob Petti  08/28/2001 07:49PM 
Last Post by Todd
Upgrading Clemens/Renzetti lathe 1,268  Eric  08/26/2001 07:52PM 
Last Post by William
Rainshadow Blanks 5,146  11  Eric  09/03/2001 12:30PM 
Last Post by Dick Thurston
Robert's Wrap 1,398  Tony  08/27/2001 01:39PM 
Last Post by Jim Johns
16" foregrips 1,441  Tony  08/25/2001 03:07PM 
Last Post by Petro Chem
Rod Oscillating 1,869  Billy 40  08/26/2001 10:45PM 
Last Post by Billy 40
Why Not Silk Thread? 1,649  Paul O  08/27/2001 01:22AM 
Last Post by Kerry
Comments on Exposed Blank Reel Seats? 1,771  11  Stephen Ashcraft  08/28/2001 07:48AM 
Last Post by Brad Tharp
contact needed 1,245  Mike Thompson  08/25/2001 08:09PM 
Last Post by Pete
SF guide choices for 12wt 1,325  Vladan  08/24/2001 04:53PM 
Last Post by Barry
Rod Drying Motors 2,336  MR  08/27/2001 12:09AM 
Last Post by Steve
Refinishing entire Blank 1,319  elrod  09/01/2001 10:37AM 
Last Post by Dick Thurston
Perma Gloss 1,239  Kerry  08/24/2001 03:36PM 
Last Post by Kerry
st croix e-mail address? 1,282  jnail  08/24/2001 09:37AM 
Last Post by Rich Garbowski
GRT180 guide spacing 1,397  fred schoenduby  08/24/2001 10:02AM 
Last Post by Petro Chem
Underwraps and the New Concept Guide system 1,403  Dwayne Rye  08/24/2001 08:32AM 
Last Post by Dwayne Rye
New St Croix Blanks 1,427  Gerald McCasland  08/24/2001 09:48AM 
Last Post by Rich Garbowski
Maniform grips 1,351  Peter  08/24/2001 01:48AM 
Last Post by Peter
Starting the spiral wrap thread again 1,866  14  Mike bolt  08/25/2001 12:12AM 
Last Post by Warren
Wanted:Used Pac Bay wrapper 1,286  Joel  08/23/2001 12:15AM 
Last Post by Jim
Noodle Rods...any suggestions 1,554  Rich Garbowski  08/29/2001 10:55PM 
Last Post by Seth
Smoky Mtn Flyrod 1,723  LonnieD  08/27/2001 07:28PM 
Last Post by jnail
Turning a Uplock into Downlock 1,401  John Kreeger  08/22/2001 12:53PM 
Last Post by Wes
Reel seat filler/spey grip 1,756  gary  08/22/2001 06:55AM 
Last Post by gary
Halibut rod 1,647  Robert Balcombe (REELMAN)  08/22/2001 09:55AM 
Last Post by Al G.
Micro Lathe 1,305  Davesrods  08/28/2001 05:49PM 
Last Post by mod2
Fish wrap 1,355  Steve  08/24/2001 11:10PM 
Last Post by Steve
Static Deflection Tests? 1,256  Warren  08/22/2001 08:25AM 
Last Post by William
musky blank 1,366  jnail  08/22/2001 06:31PM 
Last Post by Rich Garbowski
HELP! Opinions on 9'9wt saltwater blanks for stripe bass and blues 1,281  Chris  08/28/2001 07:55PM 
Last Post by Todd
Stabond Adhesive 2,238  Greg  08/22/2001 09:18AM 
Last Post by Greg
maeking pens 1,429  Dan E  08/22/2001 05:43PM 
Last Post by Kerry
Handle Problem 1,199  Eric Ege  08/21/2001 12:35PM 
Last Post by Chuck McIntyre
Calstar's New Warranty 1,595  Greg  08/20/2001 09:25PM 
Last Post by William
fenwick blanks 1,621  capt.j.keg  08/21/2001 10:59AM 
Last Post by Bob Batson
Still fence sitting/thumb suckin 1,380  Warren  08/21/2001 01:27PM 
Last Post by cam
Options:
Webmaster