I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Subject Views Posts  Started By  Last Post 
Black thread 1,612  Steve  10/21/2001 12:12PM 
Last Post by jnail
hook inlay 838  jnail  10/21/2001 10:04AM 
Last Post by Rich Garbowski
A suggestion & comment 958  Warren  10/19/2001 02:27PM 
Last Post by John Britt
Guide Spacing 897  Brian McGrath  10/19/2001 09:23AM 
Last Post by Tom Kirkman
"Generic" Loomis blanks? Seconds? Blems? 1,177  Tony Hill  10/19/2001 11:40PM 
Last Post by Tony Hill
Thread art?!? 1,386  Warren  10/19/2001 09:32PM 
Last Post by Rich Garbowski
Feather Source 1,725  12  Bob Meiser  10/29/2001 05:47PM 
Last Post by Bob Meiser
Guide spacing chart wanted. 2,503  Gunnar Joergensen  10/19/2001 09:31AM 
Last Post by Tom Kirkman
Wheels for supports 946  Larry  10/18/2001 07:56PM 
Last Post by Petro Chem
heavy duty roller guides 987  dksan  10/18/2001 07:02PM 
Last Post by Petro Chem
reel seat uplock or downlock 866  John Lasky  10/24/2001 01:13AM 
Last Post by Alberto
East Branch Rods 1,029  TomH  10/18/2001 11:16AM 
Last Post by John Lasky
dryer type choice 916  Rick W.  10/18/2001 11:38AM 
Last Post by John Lasky
Reel Seat 1,189  Larry Bennett  10/18/2001 08:11PM 
Last Post by Chuck McIntyre
G>Loomis warrenty 1,057  Mike Peppe  10/22/2001 12:23PM 
Last Post by david cooksey
30 tonnage graphite? 8,590  13  Angelo Randaci  06/18/2013 03:50PM 
Last Post by Michael McLeister
Lost email addresses 908  Capt Neil Faulkner  10/25/2001 09:02PM 
Last Post by capt.gary
Bent butt section 1,094  12  Russell  10/17/2001 10:31PM 
Last Post by Mike Bolt
Less than accurate description 1,151  Warren  10/16/2001 05:47PM 
Last Post by Warren
guides for long distance casting rod 2,678  Dave F.  10/17/2001 09:48AM 
Last Post by Tom Kirkman
Certified Professional Rod Builder 1,843  marcus  10/17/2001 10:33PM 
Last Post by Mike Bolt
Glue to relaminate a bamboo blank 934  John Lasky  10/19/2001 02:31AM 
Last Post by Davesrods
rod blanks 1,074  David Teague  10/16/2001 11:51AM 
Last Post by John Britt
Rod Drying Chucks 1,413  Scott Kolts  10/17/2001 09:19AM 
Last Post by Larry
Why are 6-7' H-XH Spinning rods so hard to get vs. Conventional? 1,240  Tony Hill  10/16/2001 10:17AM 
Last Post by Rich Garbowski
Lamiglas 2002 Prototype Blank 1,025  Warren  10/15/2001 09:34PM 
Last Post by Warren
COLOUR for light brown RODS 913  Alberto  10/15/2001 10:07PM 
Last Post by Alberto
Fuji Blanks ??? 1,071  Christian (from Brazil)  10/15/2001 08:35PM 
Last Post by William
Permagloss Proper usage? 1,166  John Lasky  10/15/2001 05:06PM 
Last Post by John Britt
Winding Checks? 1,165  Mark Vanderhoof  10/15/2001 08:46PM 
Last Post by Jim
L2000 vs vaithane 900 and more 986  John Lasky  10/15/2001 10:54AM 
Last Post by Tom Kirkman
St. Croix 1st looks like blem 1,173  Mark Schulte  10/16/2001 06:19AM 
Last Post by Jeff Stickle
rods 1,046  donnie  10/14/2001 08:57PM 
Last Post by donnie
tip deflection standard 1,230  Warren  10/14/2001 08:59PM 
Last Post by William
flex coat rod finish? 1,212  Tony  11/12/2001 04:15PM 
Last Post by Dave
Need #9 RPL+ blank or similar? 1,042  Willie Hall  10/18/2001 09:23PM 
Last Post by P.J. Petiniot
Thompson's Water Seal on cork 1,147  Jim Reinhardt  10/14/2001 08:45PM 
Last Post by Warren
Labels 1,344  10  Bill Doherty  10/15/2001 09:35AM 
Last Post by Tom Kirkman
Speaking of WINSTON 1,104  Jeff Stickle  10/15/2001 05:36AM 
Last Post by Stuart Mackenzie
Some pricing info 1,264  William  10/14/2001 08:21PM 
Last Post by William
Specials for Sunday and Monday only!! 1,012  Karen Hapka  10/13/2001 07:29PM 
Last Post by Karen Hapka
Whose feather work - 1,166  Mike B.  10/16/2001 01:26PM 
Last Post by jnail
extending handle on musky casting rod 1,304  Buzz B  10/13/2001 03:20PM 
Last Post by Dwayne Rye
Rod epoxy with rod finish 890  Tony  10/14/2001 08:25PM 
Last Post by William
humidity for wrapping finish 1,276  Tony  10/16/2001 01:36PM 
Last Post by jnail
Burl Cork 1,720  Eric  10/14/2001 03:11PM 
Last Post by Billy 40
preping a blank for finish 1,560  John Lasky  10/12/2001 03:40PM 
Last Post by Tom Kirkman
A Rod Builder deserves recognition for Relief Donation 698  Rich Garbowski  10/12/2001 11:13AM 
Last Post by Tom Kirkman
thread color 1,084  11  Dan E  10/16/2001 01:43PM 
Last Post by jnail
Laser Alignment 1,848  11  Jim  10/12/2001 01:28PM 
Last Post by Tom Kirkman
Options:
Webmaster